The XMark Power Cage XM-4430 can get you in great shape with its ergonomically designed dip handles and pull-up bar. It is designed to work well with any FID (flat, incline, and decline) bench, letting you do many upper body workout exercises. The XMark Power Cage XM-4430 comes with a pull-up bar with a knurled grip and rubber grip dip handles. Your whole body workout will be complete with this great power cage.The Power Cage XM-4430 from XMark is built to support full-body strength training with an integrated pull-up bar, a dip station, four outside and four inside U-shaped bar catches, and two safety spotter bars. Designed to accommodate users of different heights, the cage offers 24 adjustment positions on each vertical upright. The 1.25-inch diameter pull-up bar features twin knurled grip segments for a secure hold and the dip handles are covered in rubber. Designed to support free weight training and to work with flat, incline, decline (FID) benches (sold separately), the Power Cage XM-4430's multiple bar catches are compatible with Olympic and regular bars.
 The XMark Power Cage XM-4430 offers great stability with 14-gauge steel construction. |
Constructed for a lifetime of use, the XMark Power Cage XM-4430 boasts 14-gauge, 2 by 2-inch and 2 by 3-inch steel construction. Tough skid resistant feet help protect your floors and a scratch resistant powder coat finish ensures that the equipment will maintain its clean looks over time. The sturdy cage offers a 275-pound weight capacity for the dip handles, a 325-pound weight capacity for the pull up bar, and an overall weight capacity of 700 pounds. The Power Cage XM-4430 carries a limited lifetime warranty for residential use from XMark.
Key Components:
- 1.25-inch diameter pull-up bar with twin knurled grip segments
- Four outside U-shaped bar catches
- Four inside U-shaped bar catches
- Two safety spotter bars
- 20-inch wide rubber dip handles
- Oversized pop-pin adjustment for all 8 sleeves
Specifications:
- Construction: 14-gauge 2 by 2-inch and 2 by 3-inch steel
- Scratch resistant powder coat finish
- Skid resistant feet
- 24 adjustment positions on each vertical upright
- Dip handle capacity: 275 pounds
- Pull-up bar capacity: 325 pounds
- Weight capacity: 700 pounds
- Assembled weight: 110 pounds
- Assembled dimensions: 52 by 49.5 by 83 inches (LxWxH)
- Limited lifetime warranty for residential use only
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
Rack Review
I made the decision to purchase this rack becuase it appeared to be very sturdy and becuase of the addition of the dip bars. While the rack is capable supporting large loads it is unstable at times. When performing dips the back left corner or top right from the view of performing dips comes off the ground. I am only 210 lbs. This is the same for my wife whom is 130 lbs. The black guards on the top and bottom of the J-Hooks are poor quality and come off easily. This is somewhat frusturating during installation. I am even more upset that the price appears to have dropped by a couple hundred dollars in just a few weeks...
Click here to read the full review for more information about this product.
Good rack for the money
Nice design, with one exception, the metal tubing is a bit thin, and without a cross section on the bottom and fully welded sections, this is a tiny bit wobbily. Not a major issue. The extra bar placements are a handy feature, you can just set them and leave them be. I like the solid safety bar as well, much easier to use. Would be nice to have some number ticking on the holes but not a big deal.
No worth the extra price
I bought this power cage because the construction appeared to be solid. To my disappointment, it is not, and if you are going to use this cage for anything resembling serious training, beware of the following:
1.The material is too thin: while assembling the cage and trying to get the upright beams and the cage as tight as possible to avoid issue 2 below, the metal under the bolts bent! I did not use anything big, or power tools, just a regular wrench, so much for hand tight...
2. The cage is not laterally stable: if you are doing anything that has even a bit of lateral movement(kipping pull/chin ups, racking a heavy bar, dips on the dip station, etc) the uprights will move side to side, a lot, which is an issue considering that the only structural components keeping them in place are
4 thin metal plates at the bottom screwed to the uprights. This movement will fatigue the metal and break it (bending a metal wire back and forth on and on, you get the...
Product Features :
- Durable, 14-gauge steel power cage with pull-up bar and dip station--compatible with flat, incline, decline (FID) benches (sold separately)
- 24 adjustment positions on each vertical upright
- 1.25-inch diameter pull-up bar with twin knurled grip segments
- Four outside and four inside U-shaped bar catches
- 24 safety spotter bars with dip station; limited lifetime warranty for residential use
Rating : 3.5
List Price : $679.00
0 comments:
Post a Comment